LS 460 V8-4.6L (1UR-FSE) (2007)
-
Wipe the cover in one direction.
5. DETERMINE THE CENTER OF THE SENSOR INSTALLATION POSITION
a. Wrap the rubber part of the sensor tip with masking tape 3 or 4 times.
NOTE:
-
Wrap masking tape so that there is no clearance between the sensor and tape, as shown in the illustration.
-
Wrap the tape so that it has no wrinkles.
HINT: To make the tape application easier, lightly fold the tape so that it is roughly the shape of the sensor.