LS 460 V8-4.6L (1UR-FSE) (2007)
Remote Switch: Service and Repair
Steering Pad Switch
STEERING PAD SWITCH
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
2. REMOVE SWITCH & VOLUME CASE
3. REMOVE NO. 2 STEERING WHEEL COVER LOWER
4. REMOVE STEERING PAD
5. REMOVE STEERING PAD SWITCH ASSEMBLY