LS 460 V8-4.6L (1UR-FSE) (2007)
a. Disconnect the connector.
b. Remove the 4 screws and steering pad switch.
INSTALLATION
1. INSTALL STEERING PAD SWITCH ASSEMBLY
a. Install the switch with the 4 screws.
b. Connect the connector.
2. INSTALL STEERING PAD
3. INSTALL SWITCH & VOLUME CASE
4. INSTALL NO. 2 STEERING WHEEL COVER LOWER
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT STEERING PAD
7. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
8. CHECK SRS WARNING LIGHT
a. Check the SRS warning light.