LS 460 V8-4.6L (1UR-FSE) (2007)
b. Install the fuel pressure regulator to the fuel filter.
c. Attach the 2 claws of the fuel filter and install the cap.
NOTE:
-
Make sure the O-rings are not cut or pinched during the installation.
-
Attach the claws securely.
3. INSTALL JET PUMP
a. Apply gasoline to a new O-ring and install it to the jet pump.
b. Install the jet pump to the sub-tank as given in the illustration.
4. INSTALL FUEL FILTER ASSEMBLY
a. Install the fuel filter to the sub-tank and attach the 2 claws.