LS 460 V8-4.6L (1UR-FSE) (2007)
5. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY
a. Install the spring to the fuel suction plate shaft.
b. Install the fuel suction plate to the sub-tank.
c. Install a new E-ring.
d. Connect the fuel pump connector to the fuel suction plate.
6. INSTALL FUEL SENDER GAUGE ASSEMBLY
a. Set the fuel sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.
b. Connect the fuel sender gauge connector to the fuel suction plate.
NOTE: Do not touch the sender plate's resistance plate area or the contact area.