LS 460 V8-4.6L (1UR-FSE) (2007)
NOTICE:
^
When removing the mount cushion No. 1, do not allow the rear suspension member to contact SST (09316-12010).
^
Before using SST bolts, apply hypoid gear oil to their threads.
^
Be sure to combine SST properly.
^
Do not install SST bolts at an angle.
^
Make sure SST bolts are tightened equally.
57. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION
(a)
Pass SST bolt through the area shown in the illustration, and remove the mount cushion No. 2.
SST 09316-12010, 09570-24011
NOTICE:
^
When removing the mount cushion No. 2, do not allow the rear suspension member to contact SST (09316-12010).
^
Before using SST bolt, apply hypoid gear oil to its threads.
^
Be sure to combine SST properly.
^
Do not install SST bolts at an angle.
INSTALLATION
1. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION
(a)
Pass SST bolts through the area shown in the illustration, and install the mount cushion No. 1.
SST 09570-24011