LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-1190016.png)
NOTICE:
^
Make sure the mount cushion installation angle misalignment is not over ± 3.
^
Make sure the mount cushion is not at an angle by first temporarily installing the mount cushion to the member before installing SST.
^
Before using SST bolts, apply hypoid gear oil to their threads.
^
Be sure to combine SST properly.
^
Confirm that SST contacts the entire seat surface of the mount cushion.
^
Do not install SST bolts at an angle.
^
Make sure SST bolts are tightened equally.
2. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION
(a)
Pass SST bolt through the area shown in the illustration, and install the mount cushion No. 2.
SST 09570-24011
NOTICE:
^
Make sure the mount cushion installation angle misalignment is not over ± 3.
^
Make sure the mount cushion is not at an angle by first temporarily installing the mount cushion to the member before installing SST.
^
Before using SST bolt, apply hypoid gear oil to their threads.
^
Be sure to combine SST properly.
^
Confirm that SST contacts the entire seat surface of the mount cushion.
