LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1785001.png)
Hydraulic Control Assembly - Antilock Brakes: Testing and Inspection
Inspection
BRAKE CONTROL: BRAKE ACTUATOR: INSPECTION
INSPECTION
1. CHECK BRAKE ACTUATOR ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
HINT: Perform the check with the actuator at the lowest temperature possible.
Standard resistance:
If the result is not as specified, replace the brake actuator.
2. CHECK BRAKE ACCUMULATOR PUMP
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
