LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1846010.png)
(a) Install the brake master cylinder with simulator with the 4 nuts.
Torque: 13 Nm (130 kgf-cm, 9 ft-lbf)
(b) Connect the brake stroke simulator connector.
3. INSTALL PUSH ROD PIN See: Brake Pedal Assy/Service and Repair/Removal and Replacement/Installation
4. INSTALL BRAKE PEDAL RETURN SPRING See: Brake Pedal Assy/Service and Repair/Removal and Replacement/Installation
5. INSTALL BRAKE ACTUATOR AND BRAKE ACCUMULATOR PUMP ASSEMBLY See: Hydraulic Control Assembly - Antilock
Brakes/Service and Repair/Installation
6. CONNECT BRAKE TUBE See: Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Installation
7. INSTALL RESERVOIR BRACKET
(a) Install the reservoir bracket with the 3 bolts.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
8. INSTALL NO. 1 RESERVOIR HOSE
(a) Install the reservoir connector (labeled A) to the No. 1 reservoir hose (labeled B) with the hose clip (labeled C) as shown in the illustration.
