lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Front Upper Suspension Arm|Page 9191 > < Front Upper Suspension Arm|Page 9189
Page 5
background image

(b) Install the stud of the control arm, and temporarily install a new nut to the axle carrier.

HINT: Push the axle carrier downward.

6. TIGHTEN REAR UPPER NO. 2 CONTROL ARM ASSEMBLY LH

(a) Tighten the nuts on the rear control arm.

Torque: 225 Nm (2294 kgf-cm, 166 ft-lbf)for suspension member side
Torque: 160 Nm (1632 kgf-cm, 118 ft-lbf)for axle carrier side

7. TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY LH See: Rear Lower Arm/Installation
8. CONNECT TOE CONTROL LINK SUB-ASSEMBLY LH See: Wheel Hub/Service and Repair/Rear Axle Hub/Installation
9. CONNECT REAR NO. 1 SUSPENSION ARM ASSEMBLY LH See: Wheel Hub/Service and Repair/Rear Axle Hub/Installation

10. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal

and Replacement/Rear Brake/Installation

11. STABILIZE SUSPENSION

(a) Stabilize the suspension for coil suspension See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Front

Shock Absorber/Installation.

(b) Stabilize the suspension for air suspension See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Rear Shock

Absorber (W/ Air Suspension)/Installation.

12. TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY LH See: Rear Lower Arm/Installation
13. CONNECT REAR SHOCK ABSORBER ASSEMBLY LH (W/O Air Suspension)

(a) Connect the nut on the axle carrier.

Torque: 80 Nm (816 kgf-cm, 59 ft-lbf)

14. CONNECT PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER ASSEMBLY LH (W/ Air Suspension)

(a) Connect the nut on the axle carrier.

Torque: 80 Nm (816 kgf-cm, 59 ft-lbf)

15. INSTALL REAR STABILIZER LINK ASSEMBLY LH See: Stabilizer Bar/Service and Repair/Rear Stabilizer Bar/Installation
16. INSTALL REAR WHEEL

Torque: 140 Nm (1428 kgf-cm, 104 ft-lbf)

17. CHECK SUSPENSION CONTROL SYSTEM (W/ Air Suspension)

(a) Check the suspension control system See: Adjustments.

18. INSPECT AND ADJUST REAR WHEEL ALIGNMENT

(a) Inspect and adjust the rear wheel alignment See: Alignment/Service and Repair/Rear Wheel Alignment.

19. ADJUST HEADLIGHT ASSEMBLY

(a) Adjust the headlight See: Lighting and Horns/Headlamp/Adjustments.

Front Upper Suspension Arm|Page 9191 > < Front Upper Suspension Arm|Page 9189