LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Support the crossmember with the jack.
(b) for Sports package
(1) Remove the 4 bolts labeled A.
(2) Remove the 4 bolts labeled B and 2 suspension member stoppers.
(3) Slowly lower the jack, and disconnect the suspension member from the vehicle.
(c) for Standard
(1) Remove the 4 bolts.
(2) Slowly lower the jack, and disconnect the suspension member from the vehicle.
38. REMOVE STABILIZER BAR REAR
(a) Remove the 4 bolts and stabilizer bar from the suspension member.
HINT: The stabilizer bracket and bush are built onto the stabilizer bar. If the bracket and/or bush detach from the bar, replace the bar.
Installation
SUSPENSION: REAR STABILIZER BAR: INSTALLATION
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL STABILIZER BAR REAR