LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-3698010.png)
(a) Disconnect the O2 ECU connector.
(b) Disconnect the O5 curtain connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. INSPECT REAR CURTAIN RH
(a) Remove the rear curtain RH See: Service and Repair/Rear Door Sunshade Assembly/Removal.
(b) Apply battery voltage and check the operation of the rear curtain RH.
Standard:
