LS 460 AWD V8-4.6L (1UR-FSE) (2009)
OK:
Rear sunshade raises or lowers
NG -- INSPECT FUSE (RR S/SHADE)
OK -- Continue to next step.
3. READ VALUE USING TECHSTREAM (STATUS OF REAR SUNSHADE CLOSE)
(a) Use the Data List to check if the rear sunshade limit switch is functioning properly.
Body No. 4
OK:
Rear sunshade raises or lowers
OK -- INSPECT FUSE (RR S/SHADE)
NG -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (REAR SUNSHADE ASSEMBLY - REAR JUNCTION BLOCK AND BODY GROUND)
(a) Disconnect the S25 shade connector.
(b) Disconnect the S61 ECU connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE REAR SUNSHADE ASSEMBLY
5. INSPECT FUSE (RR S/SHADE)
(a) Remove the RR S/SHADE fuse from luggage room junction block.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance: