LS 460 RWD V8-4.6L (1UR-FSE) (2010)
OK:
The switch name and status are correctly displayed as operated.
NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE See: Problem Symptoms Table
OK -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Entertainment Systems/Television / Monitor/Service
and Repair/Removal and Replacement/Multi-Display (w/o Navigation System)/Removal
Screen Flicker Or Color Distortion
AUDIO / VISUAL: ELECTRO MULTI VISION SYSTEM: Screen Flicker or Color Distortion
- Screen Flicker or Color Distortion
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DISPLAY SETTING
(a) Enter the display adjustment screen by pressing the "DISP" switch.
(b) Reset the display settings (contrast and brightness) and check that the screen appears normal.
OK:
The display returns to normal.
NG -- CHECK CABIN TEMPERATURE
OK -- END
2. CHECK CABIN TEMPERATURE
(a) Check that the cabin temperature is higher than -20°C (-4.0°F).
OK:
The cabin temperature is higher than -20°C (-4.0°F).
NG -- HEAT CABIN AND RECHECK TEMPERATURE
OK -- Continue to next step.
3. CHECK COLOR BAR
(a) Enter the "Display Check" mode and select "Color Bar Check" See: Initial Inspection and Diagnostic Overview/Operation Check.