LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-2490013.png)
Text in Illustration
(b) When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
(c) Push the recording switch and perform voice recording.
HINT
Voice can be recorded up to 5 seconds.
(d) Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
OK:
All check results are normal.
NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE See: Problem Symptoms Table
OK -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Entertainment Systems/Television / Monitor/Service
and Repair/Removal and Replacement/Multi-Display (w/o Navigation System)/Removal
The Other Caller's Voice Cannot Be Heard, Is Too Quiet, Or Distorted
AUDIO / VISUAL: ELECTRO MULTI VISION SYSTEM: The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
- The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
INSPECTION PROCEDURE
PROCEDURE
1. CHECK CELLULAR PHONE
(a) Check if the voice on the other side can be heard using cellular phone.
OK:
The voice can be heard.
NG -- CELLULAR PHONE IS FAULTY
OK -- Continue to next step.
2. CHECK AUDIO FUNCTION
(a) Check that audio system sound can be heard from the front speaker.
OK:
The voice guidance can be heard.
NG -- GO TO AUDIO AND VISUAL SYSTEM See: Radio, Stereo, and Compact Disc/Testing and Inspection/Initial Inspection and