LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Attach the 2 clips and 7 claws to install the panel.
3. INSTALL FRONT PILLAR GARNISH LH
4. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY
(a) Connect the speaker connector.
(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.
(c) Install the speaker with the 2 bolts.
NOTICE:
*
Do not touch the cone part of the speaker.
*
When installing the speaker to the instrument panel be careful that get caught the wires do not get caught between the parts.
5. INSTALL NO. 1 SPEAKER HOLE COVER
(a) Attach the 4 clips to install the hole cover.
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
7. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
Components
AUDIO / VISUAL: REAR DOOR SPEAKER (for Long Body): COMPONENTS