LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-2823002.png)
(a) Apply MP grease to the sliding areas of the lock.
(b) Connect the hood lock control cable.
(c) Install the hood lock.
(d) Install the 2 bolts and nut.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(e) Install a new cap.
4. INSTALL FRONT FENDER PROTECTOR UPPER LH
(a) Attach the 3 clips to install the protector.
5. INSTALL HOOD LOCK CONTROL CABLE COVER
(a) Attach the claw to install the cable cover.
(b) Install the 3 screws.
6. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) See: Accessories and Optional
Equipment/Collision Avoidance and Parking Assist Systems/Distance Sensor/Service and Repair/Installation
7. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) See: Accessories and Optional