LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-1589002.png)
Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Installation
10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Installation
11. INSTALL INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box (w/o Rear Seat Entertainment System)/Installation
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
13. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
14. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION
(a) Perform yaw rate sensor zero point calibration See: Testing and Inspection/Programming and Relearning/Calibration.
15. CHECK YAW RATE SENSOR SIGNAL
(a) Check the yaw rate sensor signal See: Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure.