LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-947004.png)
1UR-FSE COOLING: COOLING FAN MOTOR (for 2WD): INSTALLATION
1. INSTALL FAN SHROUD WITH FAN AND MOTOR
(a) Install the fan shroud with fan and motor to the radiator, and attach the 3 claws.
(b) Attach the 3 clamps to the fan shroud, and connect the cooling fan ECU connector.
2. INSTALL RADIATOR RESERVOIR ASSEMBLY See: Thermostat/Service and Repair/Installation
3. INSTALL ECM OUTLET DUCT See: Engine/Service and Repair/Removal and Replacement/Engine/Installation
4. CONNECT NO. 2 RADIATOR HOSE
HINT
The direction of the hose clamp is indicated in the illustration.
5. CONNECT NO. 1 RADIATOR HOSE
(a) Connect the No. 1 radiator hose to the radiator and water outlet, and then secure it with the hose clamps.