LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NOTICE:
Be careful not to damage the contact surfaces of the cylinder head and camshaft housing.
HINT
Tape the screwdriver tip before use.
Installation
1UR-FSE ENGINE MECHANICAL: CAMSHAFT (for Bank 2): INSTALLATION
1. INSTALL CAMSHAFT BEARING CAP (for Bank 2)
(a) Apply a light coat of engine oil to the camshaft journals, camshaft housings and bearing caps.
(b) Install the No. 1 and No. 2 camshaft to the camshaft housing.
(c) Confirm the marks and numbers on the camshaft bearing caps and place them each in their proper positions and directions.
(d) Temporarily install the 8 bolts in the order shown in the illustration.
2. INSTALL CAMSHAFT HOUSING SUB-ASSEMBLY (for Bank 2)
(a) Make sure that the valve rocker arms are installed as shown in the illustration.