LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-874003.png)
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
(6) Install the 4 engine wire harness clamp brackets with the 4 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(7) Connect the engine wire harness with the 4 nuts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) for AWD:
(1) Connect the engine wire harness connectors.
HINT
To connect the injector driver connectors, move the lock lever to lock the connector.
(2) Connect the engine wire harness to the +B terminal of the generator assembly with the nut.
Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)
(3) Connect the 6 engine wire harness clamps.
(4) Connect the engine wire to the fusible link block assembly with the nut.
Torque : 13 Nm (127 kgf-cm, 10 ft-lbf)
(5) Connect the engine wire harness ground with the bolt.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)