LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-874004.png)
(6) Install the 3 engine wire harness clamp brackets with the 3 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(7) Connect the engine wire harness with the 4 nuts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(8) Connect the wire harness bracket with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(9) Connect the cooler compressor connector.
(10)Install the clamp bracket with the bolt.