LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-989002.png)
5. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
(a) Install a new gasket.
RH
(b) Install the exhaust manifold RH, and install 8 new nuts in the order shown in the illustration.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
6. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
(a) Install the No. 1 exhaust manifold heat insulator with the 3 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the air fuel ratio sensor connector.