LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Disconnect the 3 connectors and detach the 2 clamps.
(b) Detach the 5 clamps and disconnect the wire harness.
(c) Remove the 5 bolts and upper support.
22. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Service and Repair
23. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler condenser.
NOTICE:
*
When loosening the bolt, do not allow any tools to contact the hose.
*
When loosening the bolt, hold a part of the hose near the connector.
(b) Remove the O-ring from the cooler refrigerant discharge hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
24. DISCONNECT LIQUID TUBE SUB-ASSEMBLY