LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-2272005.png)
(a) Remove the bolt and disconnect the cooler refrigerant liquid tube from the cooler condenser.
NOTICE:
*
When loosening the bolt, do not allow any tools to contact the tube.
*
When loosening the bolt, hold a part of the tube near the connector.
(b) Remove the O-ring from the cooler refrigerant liquid tube.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
25. REMOVE COOLER CONDENSER ASSEMBLY
(a) Remove the 4 bolts and cooler condenser.
26. REMOVE COOLER DRYER
(a) Using a 14 mm socket hexagon wrench, remove the cap from the modulator.