LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Reinstall the refill plug.
4. ADJUST FLUID LEVEL
(a) w/o Air Suspension:
Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
SST : 09843-18040
(b) w/ Air Suspension:
Using SST, connect terminals 13 (TC), 11 (OPB) and 4 (CG) of the DLC3.
SST : 09843-18040
(c) Start the engine.
NOTICE:
Make sure the air conditioning switch is turned off.
(d) Slowly move the shift lever from P to S, and then change the gear from 1st to 8th. Then return the shift lever to P.
(e) Move the shift lever to D, and quickly move the shift lever back and forth between N and D (perform each movement in less than 1.5 seconds)
for at least 6 seconds.
This activates the fluid temperature detection mode.
Standard:
Indicator light (D) remains illuminated for 2 seconds and then turns off.
(f) w/o Air Suspension:
Return the shift lever to P and disconnect terminals 13 (TC) and 4 (CG).
(g) w/ Air Suspension: