LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO AFS ECU (CANH, CANL)
OK -- REPLACE AFS ECU See: Lighting and Horns/Headlamp/Headlamp Alignment Control Module/Service and Repair/Removal
19. CHECK FOR SHORT IN CAN BUS WIRES (DISPLAY AND NAVIGATION MODULE DISPLAY)
(a) Disconnect the L59 display and navigation module display connector.
(b) Measure the resistance according to the value(s) in the table below.
Result
D -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO DISPLAY AND NAVIGATION MODULE DISPLAY
(CANH, CANL)
C -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Entertainment
Systems/Television / Monitor/Service and Repair/Removal and Replacement/Multi-Display (w/o Navigation System)/Removal
B -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation
System/Navigation Display/Service and Repair/Removal and Replacement/Removal
A -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation
System/Service and Repair/Removal and Replacement/Display and Navigation Assembly/Removal
20. CHECK FOR SHORT IN CAN BUS WIRES (INTEGRATION CONTROL AND PANEL ASSEMBLY)
(a) Disconnect the L35 integration control and panel connector.