lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3912 > < Initial Inspection and Diagnostic Overview|Page 3910
Page 42
background image

(b) Measure the resistance according to the value(s) in the table below.

Result

NG --  REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO SKID CONTROL ECU (CANH, CANL)

OK --  REPLACE SKID CONTROL ECU  See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Electronic
Brake Control Module/Service and Repair/Removal

8. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (ECM)

(a) Disconnect the A13 ECM connector.

(b) Measure the resistance according to the value(s) in the table below.

Result

Initial Inspection and Diagnostic Overview|Page 3912 > < Initial Inspection and Diagnostic Overview|Page 3910