LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-1179076.png)
Standard resistance:
NG -- REPAIR OR REPLACE CAN BRANCH WIRE OR CONNECTOR (MAIN BODY ECU)
OK -- REPLACE MAIN BODY ECU
6. CHECK FOR OPEN IN ONE SIDE OF BRANCH WIRE (NO. 1 METER ECU)
(a) Disconnect the L10 No. 1 meter ECU connector.
(b) Select "CAN Bus Check" on the Techstream.
Result
B -- CHECK FOR OPEN IN ONE SIDE OF BRANCH WIRE (AFS ECU)
A -- Continue to next step.
7. CHECK FOR OPEN IN ONE SIDE OF BRANCH WIRE (NO. 1 METER ECU BRANCH WIRE)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance: