LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. CHECK AND REPLACE HARNESS AND CONNECTOR (SEAT VIBRATOR SWITCH - SEAT VIBRATOR MODULE)
(a) Disconnect the S29 seat vibrator module connector.
(b) Disconnect the r6*1 or Y6*2 switch connector.
HINT
*1: except 4-Passenger with Ottoman
*2: for 4-Passenger with Ottoman
(c) Measure the resistance according to the values in the table below.
Standard resistance:
except 4-Paasnger with Ottoman
for 4-Paasnger with Ottoman
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. CHECK SEAT VIBRATOR SWITCH (OPERATION)
(a) Replace the seat vibrator switch with a new or normally operating one. Perform an operation inspection.
OK:
Seat vibrator operates normally.
NG -- REPLACE SEAT VIBRATOR MODULE ASSEMBLY See: Body and Frame/Seats/Service and Repair/Overhaul/Rear Seat
Assembly (For Ottoman)/Disassembly
OK -- END (SEAT VIBRATOR SWITCH IS DEFECTIVE)