lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4193 > < Initial Inspection and Diagnostic Overview|Page 4191
Page 216
background image

(b) Measure the resistance according to the value(s) in the table below.

Result

NG --  REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO AFS ECU (CANH, CANL)

OK --  REPLACE AFS ECU  See: Lighting and Horns/Headlamp/Headlamp Alignment Control Module/Service and Repair/Removal

18. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (DISPLAY AND NAVIGATION MODULE DISPLAY)

(a) Disconnect the L59 display and navigation module display connector.

(b) Measure the resistance according to the value(s) in the table below.

Result

Initial Inspection and Diagnostic Overview|Page 4193 > < Initial Inspection and Diagnostic Overview|Page 4191