LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Install the front suspension member reinforcement with the 4 bolts.
Torque : 50 Nm (510 kgf-cm, 39 ft-lbf)
7. INSTALL ENGINE UNDER COVER RH
(a) Install the engine under cover with the clip and screw.
8. CONNECT FRONT STABILIZER BAR See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/AA80E Automatic Transmission/Transmission Assembly/Installation
9. INSTALL ENGINE UNDER COVER REAR RH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Installation
10. INSTALL ENGINE UNDER COVER REAR LH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Installation
11. INSTALL FRONT EXHAUST PIPE ASSEMBLY
(a) Install the front exhaust pipe See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Installation.
12. INSTALL GENERATOR ASSEMBLY
(a) Install the generator See: Charging System/Alternator/Service and Repair/Removal and Replacement/Installation.
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. INSTALL COWL TOP VENTILATOR LOUVER RH See: Charging System/Alternator/Service and Repair/Removal and
Replacement/Installation
15. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.