LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-2172011.png)
and Replacement/Engine/Removal
3. REMOVE FRONT WHEEL
4. REMOVE FRONT AXLE SHAFT NUT LH (for AWD) See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
5. DISCONNECT SPEED SENSOR CONNECTOR (for 2WD) See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
6. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
7. REMOVE FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front Brake
(except 6-Pot Caliper)/Removal
8. REMOVE FRONT DISC BRAKE DUST COVER LH See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
9. DISCONNECT SKID CONTROL SENSOR WIRE (for AWD) See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
10. REMOVE FRONT SPEED SENSOR LH (for AWD) See: Wheel Hub/Service and Repair/Front Axle Hub/Removal
11. DISCONNECT TIE ROD ASSEMBLY LH See: Steering/Steering Gear/Service and Repair/Removal and Replacement/Steering Gear (w/
VGRS)/Removal
12. DISCONNECT FRONT NO. 1 SUSPENSION UPPER ARM ASSEMBLY LH (for AWD) See: Wheel Hub/Service and Repair/Front Axle
Hub/Removal
13. DISCONNECT FRONT NO. 2 SUSPENSION UPPER ARM ASSEMBLY LH (for AWD) See: Wheel Hub/Service and Repair/Front Axle
Hub/Removal
14. REMOVE STEERING KNUCKLE SUB-ASSEMBLY LH (for AWD) See: Front Steering Knuckle/Service and Repair/Removal
15. DISCONNECT FRONT NO. 1 SUSPENSION LOWER ARM ASSEMBLY LH (for 2WD) See: Wheel Hub/Service and Repair/Front Axle
Hub/Removal
16. DISCONNECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (for 2WD) See: Control Arm/Service and Repair/Front Lower
Suspension Arm/Removal
17. DISCONNECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (for AWD)
(a) Remove the nut, and then remove the bracket of the front height control sensor LH.
18. REMOVE FRONT STABILIZER LINK ASSEMBLY LH (for 2WD) See: Control Arm/Service and Repair/Front Lower Suspension
Arm/Removal
19. REMOVE FRONT STABILIZER LINK ASSEMBLY LH (for AWD) See: Stabilizer Bar/Service and Repair/Front Stabilizer Bar/Removal
20. REMOVE AIR CONNECTOR CLIP HOLDER
(a) Pinch and pull the air connector clip holder to release the connector No. 1.