LS 460 RWD V8-4.6L (1UR-FSE) (2010)
![background image](/lexus/ls_460_rwd/v8-4.6l_(1ur-fse)/Page-2172012.png)
21. DISCONNECT NO. 4 HEIGHT CONTROL TUBE
(a) Pinch and pull the connector No. 1 to release it.
(b) Using SST, disconnect the No. 4 height control tube from the pneumatic front LH with shock absorber cylinder assembly.
SST : 09730-00010
NOTICE:
After pulling out the height control tube, replace the O-ring and plate with new ones.
22. DISCONNECT FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH (for 2WD)
(a) Support the steering knuckle LH with a jack and wooden block.
(b) Remove the bolt and nut, and then disconnect the bottom side of the pneumatic front LH with shock absorber cylinder assembly from the front
No. 2 suspension lower arm LH.
(c) Remove the nut and clip.