LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
(a) Attach the 2 clips and 7 claws to install the panel.
3. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
4. INSTALL FRONT PILLAR GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY
(a) Connect the speaker connector.
(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.
(c) Install the speaker with the 2 bolts.
-
Do not touch the cone part of the speaker.
-
When installing the speaker to the instrument panel be careful that get caught the wires do not get caught between the parts.
6. INSTALL NO. 1 SPEAKER HOLE COVER
(a) Attach the 4 clips to install the hole cover.
7. INSTALL MULTI DISPLAY ASSEMBLY WITH BRACKET
(a) w/o Navigation System:
Install the multi-display See: Accessory Control Display/Service and Repair/Installation.
(b) w/ Navigation System:
Install the multi-display See: Navigation System/Navigation Display/Service and Repair/Multi-Display (w/ Navigation System)/Installation.
(c) for HDD Navigation System:
Install the display and navigation See: Navigation System/Navigation Display/Service and Repair/Display and Navigation
Assembly/Installation.
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
9. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY