LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Brake Pedal Assy: Service and Repair
Installation
BRAKE: BRAKE PEDAL SUPPORT: INSTALLATION
INSTALLATION
NOTE: While the battery is connected, even if the power switch is OFF, the brake control system activates when the brake pedal is depressed
or the door courtesy switch turns on. Therefore during servicing of the brake system components, do not operate the brake pedal or open/close
the doors while the battery is connected.
1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY
(a) Install the brake pedal support with the 2 bolts.
Torque: 19 Nm (195 kgf-cm, 14 ft-lbf)
(b) Install the 4 nuts.
Torque: 13 Nm (130 kgf-cm, 9 ft-lbf)
2. INSTALL PUSH ROD PIN