LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
-
Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
(c) Connect the camshaft timing oil control valve connector.
2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
(a) Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
(b) Install the oil control valve with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
-
Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
-
Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
(c) Connect the camshaft timing oil control valve connector.
3. INSTALL NO. 1 AIR CLEANER INLET See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
5. INSTALL V-BANK COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Installation