LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
13. INSTALL REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
14. INSTALL REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
15. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Fixed
Seat Type)/Installation
16. INSTALL REAR SEATBACK ASSEMBLY LH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Power
Seat)/Installation
17. INSTALL REAR SEATBACK ASSEMBLY RH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Power
Seat)/Installation
18. INSTALL REAR SEATBACK ASSEMBLY LH (for Ottoman) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Ottoman)/Installation
19. INSTALL REAR SEATBACK ASSEMBLY RH (for Ottoman) See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for
Ottoman)/Installation
20. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH
(a) Install the floor end of the rear seat outer belt assembly LH with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTE: Do not allow the anchor part of the rear seat 3 point type belt assembly LH to overlap the protruding parts of the floor panel.
(b) Check if the ELR locks.
NOTE: The check should be performed with the outer belt assembly installed.
(1) With the belt assembly installed, check that the belt locks when it is pulled out quickly.
21. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH
(a) Use the same procedures described for the LH side.
22. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
(a) for Power Seat:
Install the floor end of the rear seat outer belt assembly center with the nut.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTE: Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding parts of the floor panel.