LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
1. REMOVE FRONT CENTER FLOOR COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE NO. 2 ENGINE UNDER COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal
4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal
5. REMOVE NO. 1 ENGINE UNDER COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
6. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine Assembly/Removal
7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
(a) Remove the 2 nuts and front stabilizer link.
HINT: If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.
8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT: Remove the RH side following the same procedures as the LH side.
9. REMOVE FRONT NO. 1 STABILIZER BRACKET LH
(a) Remove the bolt and wire harness bracket.