LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
SST: 09950-00020
SST: 09950-40011
09951-04020
09953-04030
SST: 09950-50013
09952-05010
09955-05040
NOTE: Be careful not to damage the No. 2 dust deflector.
(d) Using a snap ring expander, install a new snap ring.
2. INSTALL PROPELLER INTERMEDIATE SHAFT
(a) Install the dust boot.
NOTE: Assemble the propeller intermediate shaft assembly after wrapping vinyl tape around the spline so that it will not damage the boot.
(b) Apply grease to the spline.
Grease:
Molybdenum disulphide lithium base NLGI No. 2
(c) Align the matchmarks and assemble the intermediate shaft and propeller shaft.
(d) Cover the adjusting nut with the dust boot.
NOTE: The directions of the intermediate shaft companion flange and the propeller shaft companion flange should differ by 180°.
(e) Temporarily tighten the adjusting nut by hand.
Installation
PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY: INSTALLATION