LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
1. TEMPORARILY INSTALL FRONT PROPELLER SHAFT ASSEMBLY
(a) Align the matchmarks on the differential companion flange and front propeller shaft.
(b) Temporarily install the front propeller shaft with 6 new bolts and the 2 universal joint washers.
(c) Align the matchmarks on the transfer companion flange and front propeller shaft.
(d) Temporarily install the front propeller shaft with 6 new bolts and the 2 universal joint washers.
2. INSTALL REAR ENGINE MOUNTING MEMBER
(a) Set the rear No. 3 engine mounting insulator to the rear engine mounting member.
(b) Temporarily install the rear engine mounting member to the hybrid vehicle transmission assembly with the 5 nuts.
(c) Install the rear engine mounting member with the 4 bolts.
Torque: 26 Nm (260 kgf-cm, 19 ft-lbf)
(d) Tighten the 5 nuts.