RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Parts Information
Repair Procedure
Replace Drive Rail Sub-Assemblies.
1.
Remove Roof Headlining Assembly (See Technical Information System [TIS] 2004 RX 330 Repair Manual: Exterior/Interior Trim)
2.
Remove Roof Drip Side Finish Moulding LH (See TIS: Exterior/Interior Trim)
3.
Remove Roof Drip Side Finish Moulding RH (See TIS: Exterior/Interior Trim)
4.
Remove Sliding Roof Side Garnish LH
A.
Remove the 2 screws and side garnish.
5.
Remove Sliding Roof Side Garnish RH
A.
Remove the 2 screws and side garnish.
6.
Remove Sliding Roof Glass Sub-Assembly
A.
Using a torx wrench (T25), remove the 12 screws.
B.
Gradually remove the sliding roof glass from the front side.
7.
Remove Sliding Roof Housing Front Mounting Bracket LH
A.
Remove the 4 bolts and front bracket.
8.
Remove Sliding Roof Housing Front Mounting Bracket RH
A.
Remove the 4 bolts and front bracket.
9.
Remove Sliding Roof Housing Center Mounting Bracket LH