RX 330 AWD V6-3.3L (3MZ-FE) (2004)
HINT:
If replacing a bearing, replace it with one that has the same number. If the number of the bearing cannot be determined, select the correct bearing by
adding together the numbers imprinted on the cylinder block and crankshaft, then refer to the table on the bottom of this page for the appropriate
bearing number. The No. 1 and No. 4 journal bearings have 5 standard bearing sizes, marked 3, 4, 5, 6, and 7 accordingly.
The No. 2 and No. 3 journal bearings have 5 standard bearing sizes, marked 1, 2, 3, 4, and 5 accordingly.