RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
NOTICE:
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
*
Do not apply too much primer.
3. INSTALL NO. 2 BACK WINDOW GLASS SPACER
(a) Apply Primer G to the installation part of the No. 2 back window glass spacer.
HINT
If primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.
(b) Install a new No. 2 back window glass spacer onto the back door glass, as shown in the illustration.
Text in Illustration
NOTICE:
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
*
Do not apply too much primer.
4. INSTALL NO. 1 BACK WINDOW GLASS SPACER
HINT
Use the same procedure for the RH side and LH side.
5. INSTALL BACK DOOR GLASS SPACER
(a) Apply Primer G to the installation part of the back window glass spacer.
HINT
If primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.
(b) Install 2 new back door glass spacers onto the back door glass, as shown in the illustration.
Text in Illustration