lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2875 > < Initial Inspection and Diagnostic Overview|Page 2873
Page 96
background image

NG --  REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 J/C - CERTIFICATION ECU)

OK --  REPLACE CERTIFICATION ECU (SMART KEY ECU)  See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Alarm Module/Service and Repair/Removal

15. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 J/C - ECM)

(a) Disconnect the ECM connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG --  REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 1 J/C - ECM)

OK --  REPLACE ECM  See: Engine Control Module/Service and Repair/Removal

16. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 J/C - NAVIGATION ECU)

Initial Inspection and Diagnostic Overview|Page 2875 > < Initial Inspection and Diagnostic Overview|Page 2873