RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(a) Disconnect the navigation ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
Result:
C -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 J/C - NAVIGATION ECU)
B -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (for HDD) See: Accessories and Optional
Equipment/Navigation System/Service and Repair/Navigation Receiver (for HDD)/Removal
A -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (for DVD) See: Accessories and Optional
Equipment/Navigation System/Service and Repair/Navigation Receiver (for DVD)/Removal
Scan Tool Testing and Procedures
NETWORKING: LIN COMMUNICATION SYSTEM: DATA LIST / ACTIVE TEST
1. DATA LIST
HINT
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read
without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be
discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save