RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Steering Wheel: Service and Repair
Installation
STEERING COLUMN: STEERING WHEEL: INSTALLATION
1. INSTALL STEERING PAD ATTACHING SCREW
(a) Install the 2 steering pad attaching screws to the lower steering wheel boss cover.
2. INSTALL LOWER STEERING WHEEL BOSS COVER
(a) Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.
(b) Engage the 2 pins.
3. INSTALL CRUISE CONTROL SWITCH WIRE
4. INSTALL CRUISE CONTROL MAIN SWITCH See: Cruise Control/Cruise Control Switch/Service and Repair/Installation
5. INSTALL STEERING PAD SWITCH ASSEMBLY
(a) Engage the 2 claws and pin to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.
(b) Install the screw.
Torque : 2.4 Nm (25 kgf-cm, 21 in-lbf)
(c) Engage the 2 claws and pin to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.