RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Front Steering Knuckle: Service and Repair
Installation
AXLE AND DIFFERENTIAL: STEERING KNUCKLE: INSTALLATION
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. INSTALL STEERING KNUCKLE
(a) Using SST and a press, install a new front axle hub bearing to the steering knuckle.
SST : 09950-60020
09951-00810
SST : 09950-70010
09951-07100
2. INSTALL FRONT DISC BRAKE DUST COVER See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
3. INSTALL FRONT AXLE HUB SUB-ASSEMBLY See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
4. INSTALL FRONT AXLE HUB HOLE SNAP RING See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
5. INSTALL FRONT NO. 1 WHEEL BEARING DUST DEFLECTOR See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
6. INSTALL FRONT LOWER BALL JOINT ASSEMBLY See: Ball Joint/Service and Repair/Installation
7. INSTALL FRONT AXLE ASSEMBLY
HINT
Refer to the procedures from "Install Front Axle Assembly" See: Wheel Hub/Service and Repair/Front Axle Hub/Installation.