RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
HINT
For the disconnecting procedure of the tube (type 3), refer to Precaution of the suspension control system See: Service
Precautions/Suspension Control System.
(b) Disconnect the 2 connectors.
(c) Disengage the wire harness clamp from the bracket.
(d) Remove the 4 bolts and height control compressor with bracket.
7. REMOVE HEIGHT CONTROL COMPRESSOR BRACKET
(a) Disengage the wire harness clamp.
(b) Remove the 2 bolts, nut and height control compressor bracket from the body.
8. REMOVE HEIGHT CONTROL FILTER
(a) Separate the 2 clips and 2 height control hoses.
(b) Remove the 2 bolts and height control filter.
9. REMOVE NO. 1 HEIGHT CONTROL HOSE