RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(a) Remove the clip and No. 1 height control hose.
10. REMOVE NO. 2 HEIGHT CONTROL TUBE
(a) Remove the holder.
HINT
For the disconnecting procedure of the tube (type 3), refer to Precaution of the suspension control system See: Service
Precautions/Suspension Control System.
(b) Separate the 3 clamps and disconnect the No. 2 height control tube from the height control compressor assembly.
11. REMOVE HEIGHT CONTROL VALVE HARNESS ASSEMBLY
(a) Disconnect the connector and disengage the 3 clamps from the bracket.
(b) Detach the connector's claw and height control valve harness assembly.
12. REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY
(a) Remove the 3 bolts, 3 bushings and bracket from the compressor.